Drop a DXF drawing, a flat pattern, an STL mesh or a STEP model to begin.
Use DIST, AREA, ID, radius or angle — results appear here and on the drawing.
These rules run every time a DXF is loaded, before the 3D build. Outline geometry of the views is protected: rules only remove open, free-ended lines (dimensions, leaders, arrows), plus anything you match by layer or colour. Saved in this browser.
Used when a drawing is a flat pattern (unfolded blank) with bend lines. Panel 02 → Drawing type chooses Auto, Orthographic or Flat. Values here are defaults; bend notes such as UP 90° R2 and edits in the bend table take precedence.
A line is a bend line when its layer, linetype and colour all match. * = any value; separate several patterns with commas (BEND*, FOLD*). Lines matching the DOWN rule fold down; other bend lines use the UP rule.
FANUC-style G-code for a laser, generated from the flat pattern: cut-outs first (nearest-neighbour order), outline last; G41 kerf compensation with lead-ins on the scrap side; full circles as G03. Beam and condition codes differ between machines — set them to match your control.
Colours and transparency apply immediately as a preview; Save keeps them, Cancel reverts.